Brand: HP
Wi-Fi antenna: AP?754: Two sets of four (female) RP?SMA connectors for external antennas (A0 through A3 corresponding with radio chains 0 through 3 for the 2.4 GHz and 5 GHz radios, and B0 through B3 corresponding with radio chains 0 through 3 for the 6 GHz radio). Worst?case internal loss between radio interface and external antenna connectors: 1.1 dB in 2.4 GHz, 1.8 dB in 5 GHz, and 2.8 dB in 6 GHz.
AP?755: Integrated down tilt omni?directional antennas for 4x4 MIMO with peak antenna gain of 5.3 dBi in 2.4 GHz, 6.0 dBi in 5 GHz (5.8 dBi in dual?5 GHz mode) and 6.0 dBi in 6 GHz (5.9 dBi in dual?6 GHz mode). Built?in antennas are optimized for horizontal ceiling mounted orientation of the AP. The down tilt angle for maximum gain is roughly 30 to 40 degrees.
Connectivity, standard: Wi-Fi 7 (802.11be)
Ports: E0, E1: Two Ethernet wired network ports (RJ?45);
U0, U1: Two USB 2.0 host interface (Type A connector);
Serial console interface (proprietary, micro?B USB physical jack);
Kensington security slot;
Mounting: A mounting bracket has been preinstalled on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately). Optional mounting kits available, see the ordering guide.
Power consumption: Maximum (worst case) power consumption (without/with USB devices attached):
DC powered: 35W/46W
PoE powered: 40W/51W
This assumes that up to 10W is supplied to the attached USB device(s)
Maximum (worst?case) power consumption in idle mode: 14W/25W (DC) or 12W/23W (PoE)
Maximum (worst?case) power consumption in deep?sleep mode: 2.4W (DC) or 3.5W (PoE)
Radio coverage: AP type: Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz (concurrent) 802.11be 4x4 MIMO
Warranty: Limited lifetime warranty.
Click To Call