Brand: HP
Wi-Fi antenna: AP?734: Two sets of two (female) RP?SMA connectors for external antennas (A0 and A1 corresponding with radio chains 0 and 1 for the 2.4 GHz and 5 GHz radios, and B0 and B1 corresponding with radio chains 0 and 1 for the 6 GHz radio). Worst?case internal loss between radio interface and external antenna connectors: 0.8 dB in 2.4 GHz, 1.2 dB in 5 GHz, and 1.2 dB in 6 GHz.
AP?735: Integrated down-tilt omni?directional antennas for 2x2 MIMO with peak antenna gain of 5.1dBi in 2.4 GHz, 5.5dBi in 5 GHz (5.2dBi in dual?5 GHz mode) and 5.3dBi in 6 GHz (5.2dBi in dual?6 GHz mode). Built?in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
Connectivity, standard: Wi-Fi 7 (IEEE 802.11be)
Ports: E0, E1: Two Ethernet wired network ports (RJ?45);
U0, U1: Two USB 2.0 host interface (Type A connector);
Kensington security slot;
Serial console interface (proprietary, micro?B USB physical jack);
Reset button: Factory reset, LED mode control (normal/off);
Visual indicators (four multi?color LEDs) for System (1x) and Radio (3x) status
Mounting: A mounting bracket has been preinstalled on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately). Optional mounting kits available, see the ordering guide.
Power consumption: Maximum (worst case) power consumption (without/with USB devices attached):
DC powered: 20W/31W.
PoE powered: 24W/36W.
Notes:
This assumes that up to 10W is supplied to the attached USB device(s).
Maximum (worst?case) power consumption in idle mode: 8W/19W (DC) or 12W/24W (PoE).
Maximum (worst?case) power consumption in deep?sleep mode: 1.5W (DC) or 2.0W (PoE).
Radio coverage: AP type: Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz (concurrent) 802.11be 2x2 MIMO
Warranty: Limited lifetime warranty.
Click To Call